DW920 dish washer?

The screws go in to a steel piece about 2 inches long. Don't know why F&P never fixed that piece so it couldn't move away. You have to now remove the outer cabinet by removing the screws at the back which hold it. Also remove the lower panel beneath the door and remove the screws at the front. Then all the screws around the front edge of cabinet hidden under the plastic trim. Gently lift the cabinet and move it back far enough to locate & reposition the steel piece. If I were you I would buy a new latch and not re use a glued one. They are cheap.

Lincoln Appliance NZ
November 2016