Recent: Will I need to replace my garden tap?

Mend > Wall Clocks

Mend Not Working Correctly

not working correctly?

installed a fresh duracell battery, worked ok for awhile , then eventually slowed-up. i've been trying different solutions. with the clock laying flat it's been working 100%, when in a vertcal position, such as on the wall, starts acting up again. help!

gary
July 2016
1) Have you considered that the battery you installed was defective and gave up too soon?

2) The mechanisms for battery operated clocks are very simple and very inexpensive - easy to replace too - Amazon sell them

Good Luck...
July 2016

Automatic Answer

We may have found other answers which could help you.

Click here for Not Working Correctly

Related Questions ...

Mend sewing machine threading stitch
1

Singer zigzag 457 Stylist not threading bobbin/making stitch?

Singer Model 457 zigzag Stylist will not thread bobbin. The gears on the long bar on the top both turn; the ge... [Read more]
Mend creda storage heater three
2

Creda Night Storage Heater 79065B?

Have three heaters, one is working fine, one is emitting a smell when using up last of it's storage and the th... [Read more]
Mend radiator overheat thermostat
1

oil filled radiator wiring fault?

Hi, I recently bought two new identical oil filled radiators off ebay. Both of them dont seem to work c... [Read more]
Mend trimmer drive &
1

Grass trimmer not working correctly?

My Strimmer is not working properly. The power is getting through fine but the but that turns around at the bo... [Read more]
Mend oven motor cooker
1

how can i make a new oven fan motor work?

I fitted an oven fan motor on my hygena turbo built in cooker - the model number is ahy4220. I managed to do e... [Read more]
Mend alarm reset reason
3

Captiv8 alarm?

What is "ZEX TAMPER"? This message along with "ENGINEER RESET" is now being displayed on our keypad. I have ... [Read more]
Mend singer service machine
2

How to repair my singer futura 250. ?

I sent the embroidery unit to be repaired and the service tech said my machine must not be working correctly. ... [Read more]
Mend vectra plate normal
1

wipers/washer vectra 57 plate?

wipers not working correctly intermitten and normal work a bit then go off and front washer not working also f... [Read more]
Mend tamper pir keypad
15

Accenta G4 mini and remote keypad only illuminating?

I recently had an issue with my Accenta G4 alarm and remote keypad. For some unknown reason the tampers were a... [Read more]
Mend electric appliance repair
1

How can I fix my Stove 800 grill?

At the moment I am having to turn my power supply off to my cooker as when it's on the grill is constantly sta... [Read more]
Mend zanussi washer washing
1

strange smell & dryer not working correctly?

I have a Zanussi washer/ dryer ZJD19121 after washing there is a terrible smell of stale water coming out of m... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend instrument panel lights warning
2

how to fix no instrument panel on lf45?

I have a DAF LF45 and the instrument panel is not working no ign lights, gauges, warning lights etc. checked a... [Read more]
Mend apart xp missing
1

how to sort out apart of Windows 2000 XP Professional that is missing?

I have Windows 2000 XP Perfessional when it says updates ready I click on it and at the end it brings up a win... [Read more]
Mend thermostat heating wireless
3

How to fix a Siemens RDH10RF wireless thermostat?

Hello, I have an RDH10RF remote thermostat for my central heating. Since I put new batteries in it doesn't see... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Wall Clocks ...

Related Categories

Mend Wrist Watches
Wrist Watches