Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Hotpoint Ultima Wash

Hotpoint Ultima WMD940 won't wash?

Hi, the problem we have is that the machine will fill with water twice & then it stops, the drum won't rotate & after a few minute an error message showing F:01 with appear & the machine emptys again. You the have to turn the machine off at the mains & after waiting a few minutes & switching back on the same thing will happen. We have tried stopping the machine from its cycle after it fills & switching off at the mains again, then retrying which sometimes works, but more than often it will just fill with even more water & still not rotate. It does go through a little spell of working fine for a few days & then this problem again.
Please help if possible!
Mark.

Mark
February 2015
HotpointHotpoint UltimaHousehold Appliances, Washing MachinesHotpoint Ultima Wash
Mark, this this is a classic main module fault. You need to change the main module in the back of the machine. We stock it at £56.28 + £6 postage (exchange). This is ready programmed for your model number. To order, go to our website at www.emwelec.co.uk and put WMD940 in the search box or call us on 01159652118 & speak to Andy. You will still have the option of returning the module within 14 days for a refund (less our handling of £12) if it does not sort out the problem. Tony EMW Electronics

Tony
February 2015

Automatic Answer

We may have found other answers which could help you.

Click here for Hotpoint Ultima Wash

Related Questions ...

Mend washing machine pressure switch fault
1

how can i fix hotpoint wmd 940 ultima?

hi there i have a hotpoint wmd 940 ultima, my fault is i start the washing machine, when i come back to it,th... [Read more]
Mend washing machine hotpoint ultima wmd960
1

hotpoint ultima wmd960?

when washing macine working midde of the wash pover is of after I take plack of on start working can you help ... [Read more]
Mend washing machine detergent fabric softener
1

How to clean a hotpoint wmd740 ultima?

There isn't a bad smell in the washing machine but after the cycle has finished my clothes have NO smell. The ... [Read more]
Mend How to mend it?
1

hotpint ultima wt960?

Half way of the wash it comes an err h20 and it take long time to finish this wash. Also the conditioner is no... [Read more]
Mend hotpoint stops stopped
1

Hotpoint Ultima WT960 stops mid cycle?

F8 has come up when the machine has stopped. Usually after the wash cycle and before the spin.
Mend washing machine drum motor
1

Hotpoint ultima wma62 won't turn drum?

I have a hotpoint ultima wma62 that won't turn the drum during the cycle.i've checked the belt and it's fine a... [Read more]
Mend error code washing machine hotpoint ultima
2

Hotpoint WDD960 error and not spinning?

Hi, Hope someone can help! My Hotpoint Ultima WDD960 wasking machine keeps coming up with error code F:02....... [Read more]
Mend hotpoint washing machine error
2

Hotpoint ultima silent washing machine F-08?

We have this machine and error code F-08 keeps flashing up on the machine it kept shorting and tripping out...... [Read more]
Mend hotpoint door ultima
2

My hotpoint wt741 ulitma washing Mach is flashing door?

My hot point wt741 ultima wash/mac is flashing door I have already changed the locking mec and WD40 on door lo... [Read more]
Mend hotpoint ultima cycle
2

Hotpoint WD860 Ultima (washer/dryer) Error code and also stuck cycle?

Right I bought this refurbished and funny that after the 3months warranty its gone wrong, at first got an erro... [Read more]
Mend washing machine error code repair
4

hotpoint aquarius wash system plus ultima 1200 wm72 ?

my washing machine keeps getting stuck on the rinse cycle and repeats the rinse untill i turn it off. it has a... [Read more]
Mend washing machine hotpoint stops
1

Cycle starts and then stops after a few minutes?

We have Hot point Ultima Extra Wm A63. When we turn it on to wash it starts filling with water then after a ... [Read more]
Mend washing machine error code hotpoint
1

error code?

my hotpoint ultima WF840 displays error code F12 and wont wash any ideas
Mend washing machine faulty drains
1

hotpoint fauly?

i have hotpoint wma63 ultima extra which starts the washing cycle but then just cuts off after about a min - w... [Read more]
Mend drain cycle fine
2

hotpoint ultima wma76 wont drain?

wash cycle runs fine but towards the end water gushes out of the drawer and around the door it does not drain
Mend washing machine repair belt

How can I change the belt on a Hotpoint Aquarius WF 640 wash?
Mend cycle 1400 washing

How can you do spin only cycle on ultima 1400 washing machin?
Mend washing machine Hotpoint aquarius

Not starting until I bang door closed?
Mend washing machine fault repair hotpoint

Hotpoint WD865A stopped mid wash. 8pin chip U2 blown its to?
Mend washing machine Hotpoint fault

Door sensor Hotpoint WMXTF 742?
Mend washer dryer error code hotpoint

Washer dryer WD640 flashing H20 error?
Mend washing machine stuck door hotpoint ultima

Hotpoint Washing machine door stuck?
Mend washing machine repair door

How can i mend?
Mend washing machine bearing replacement

Hotpoint wma34 bearing replacement?
Mend 1400 express water

Logixx 1400 express?
Mend hotpoint washing machine

Twin Tub leaking?
Mend washing machine hotpoint spin

Hotpoint wt960?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...

Other models...

Hotpoint 9404Hotpoint 9545Hotpoint AQALTISHotpoint AquariousHotpoint FEW12Hotpoint WD420GHotpoint WD440Hotpoint WD64Hotpoint WD860PHotpoint WD865AHotpoint WF210Hotpoint WF310Hotpoint WM66Hotpoint WMA 32Hotpoint WMA32Hotpoint WMA36Hotpoint WMA40Hotpoint WML560Hotpoint WMT05Hotpoint WT746

Related Categories

Mend Knitting Machines
Knitting Machines
Mend Sewing Machines
Sewing Machines
Mend Stairlifts
Stairlifts
Mend Steam Cleaners
Steam Cleaners
Mend Steam Irons
Steam Irons
Mend Tumble Dryers
Tumble Dryers
Mend Vacuum Cleaners
Vacuum Cleaners

Topic

Hotpoint WMD940 Washing Machine Error F:01 - Help