Recent: Mountfield sp454?

Mend > Stairlifts

Mend Stannah 420 Problem Developed Fault

Stannah 420 Problem?

Our Stannah Stairlift 420 has just developed a fault, it will go down ok but not up, l can manually wind it up but there is no click from the arm switch to send the chair up. Could this be a brush problem and if so how do l clean or replace it/them or is it a problem with the arm toggle switch ?, thanks.

Paul_S
December 2014

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Problem Developed Fault

Related Questions ...

Mend circuit board fault
1

how can i fix my renault megane 2009 aerial circuit board?

The aerial circuit board must have developed a fault as stations have very bad reception. Have changed the ae... [Read more]
Mend starter motor something else
2

starter motor or something else?

Hi I have a vauxhall bertone 1.8 on a 02 plate that has developed a problem.The issue appears to be intermitte... [Read more]
Mend fault switch fully
1

minivator 950 power problem?

Hi guys, power fault developed with stairlift. Switch on, fully functional for around 20 seconds then shuts d... [Read more]
Mend How to mend it?
9

cctv monitor/tv ?

Hi since this is related to security systems i thought i would opt for here. The problem iam having is with m... [Read more]
Mend How to mend it?
1

Potterton PRT2/ EP2002 C/H always on (unless at temp)?

I have developed a fault on my Potterton EP2002 Programmer following short circuiting and blowing a fuse. The ... [Read more]
Mend boiler central heating programmer
2

Potterton Programmer not controlling stat?

I developed a fault on my Potterton system as a direct result of trying to change the in room stat (Potterton ... [Read more]
Mend scantronic hello system
3

ef/door contact problems on scantronic 9800?

Hello can anyone advise please - I have a scantronic 9800 alarm system and it developed a fault just before Ch... [Read more]
Mend clear fault code
1

how can i clear a fault code ?

about a week ago we had a couple of days of minus 5/6deg c . my dyson cro1 washer pipes froze up and it deve... [Read more]
Mend boiler gas valve pcb
2

Help with Baxi 105e?

My Baxi 105e has recently developed a problem! On Saturday expansion vessel packed in and leaked. I dried ever... [Read more]
Mend Saunier Duval Boiler Central Heating
2

How can I fix my Saunier Duval Semia Condens boiler?

The Central Heating (CH) side works perfectly but the Domestic Hot Water (DHW) has developed a problem, thus..... [Read more]
Mend rover engine fault
1

rover 75 technical/mechanical fault?

Hi My rover 75 has developed a problem where the check the engine light keeps coming on flashing then the soli... [Read more]
Mend boiler heating repair
2

How can fix my Ideal Mexico Super RS 65 Boiler?

My Ideal Mexico Super RS 65 boiler has developed an intermittent fault. When the programmer switches off the ... [Read more]
Mend transit van full
1

Transit 260td 2002?

I have just purchased my first tranny!!! this van is in very good condition and has full service history inclu... [Read more]
Mend hedge cutter blades
2

hedge cutter blades runs on ?

I have a JCB electric hedge cutter with electric brake fitted. it has now developed a fault, what happens is ... [Read more]
Mend indicator developed problem
3

indicator fault on isuzu trooper?

hi. my 1992,swb isuzu trooper has developed a problem with the right indicator,left is ok,basically nothings h... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Stairlifts ...