Fisher Paykel Excellent 6.5 model GW609AU?

Thanks David, that is error code 43 which means the out of balance switch is faulty (probably corrosion) so the machine will not start because it thinks the load is out of balance. You need to change the switch. Turn power off and unplug from the wall socket. Open the top panel. The microswitch is under the right hand end of the main control box. Take the one screw out holding the control box front edge. Lift the control box up to reveal the switch. Disconnect the 2 wires on switch and remove it. Pull it straight up gently because it is only held in with 2 plastic pins which break off easily. Fit new switch, put wires back on either way around. Job done. You can get those switches from an electrical wholesale shop or electronics store.

Lincoln Appliance NZ
October 2014

Lights on from the left,3rd green,5th green,7th orange and the 8th red.

David
October 2014

Then it will start beeping to tell you to check the error code. What is it? When it beeps, before pressing any buttons look at the 8 lights along the top row. Count from left to right and note exactly which lights are on & which are off. Post the result back here.

Lincoln Appliance NZ
October 2014