I have just moved into my new home which has a built-in Zanussi ZDF290X cooker. I can't set the time on the clock. It flashes continually at 12:00 and when I try to set the time using the + or - buttons it only moves a few minutes before going back to 12:00 again. Any thoughts?
buttons faulty in that case on the clock.pull the buttons off and use a cocktail stick to press button.Failing that new clock or bypass it
CK
October 2013
I tried that and it still does the same. I still have the manual and can't see any other way of setting the clock.
Steve
October 2013
Switch off at the wall for 30min then switch it on.clock will flash then follow instructions I gave you.Manuals are downloadable for free from www.serviceforce.co.uk
CK
October 2013
Hi. I pressed the - button and the Selector Control Button together then the started to press the + button to set the time. The clock displayed 1.7 then went blank and there was a continuous beep. The only way I could stop this was by de-selecting all the buttons then pressing anyone of them again. The beep stopped and it just went back to flashing 12:00 again.
Steve
October 2013
press and hold the other 2 buttons in whilst using the + and - buttons to set time.once time set let go of the 2 buttons.job done
CK
October 2013
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix electric cookers.