Recent: Home max fs506x?

Mend > Home Heating Systems

Mend Netaheat 16/22 Heating Pcb Fault Finding

Netaheat electronic 16/22 not sparking have changed pcb?

Is there a fault finding guide

Chris game
May 2013
NetaheatNetaheat 16/22Heating, Home Heating SystemsHeating Pcb Fault Finding
I know very little about boilers but my guess is that your boiler has a Fan and an air pressure switch to sense that the fan is working properly. Before the gas is lit by the spark the fan/switch need to be satisfied. Fad fan/switch = no spark.

mm knew this all along but was too shy to say.

Peccavi
May 2013
it never ceases to amaze me why people just change componets rather than get a test meter out and trace the fault,you have just made an expensive mistake mate,as you have found out.never mind,you now have a spare pcb for the future ,when you find the real fault

mm
May 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Heating Pcb Fault Finding

Related Questions ...

Mend combi boiler fault finding heating
1

baxi 80e combi boiler?

HEATING symbol doesnt light up,have followed fault finding procedure & fitted new PCB still no heating, divert... [Read more]
Mend heating fault burner
1

My Glow Worm Micron 30FF wont light. How can I check whats wrong&fix it?

I have a Glow worm Micron 30FF which was installed new 4 years ago. Since then it has been serviced and a new... [Read more]
Mend failed hello boiler
3

Has the Fan Assembly truly failed?

Hello all I have a Glow Worm Ultimate 120FF boiler that serves the central heating in my home. The system ... [Read more]
Mend ravenheat csi 85 burner
2

Ravenheat CSI 85 A (T) Burner Cycling Constantly?

Hi all... I've got a Ravenheat CSI 85 A (T) combi and shows the following symptoms. It's fine with HW on... [Read more]
Mend boiler fires seconds
9

FERROLI OPTIMAX 25C OVERHEATING?

When I turn on the hot tap the boiler fires up then a few seconds later it overheats and I get F3 fault code, ... [Read more]
Mend boiler pcb fault finding
3

Potterton Suprima Fault Finding Guide?

I have a Potterton Suprima 80L. When going through the initial conditions check (fault finding guide) I get t... [Read more]
Mend boiler heating fault
2

Baxi 105e instant fan continues to run and will not switch off?

Hi there. I have a Baxi 105e instant boiler. When heating DHW it goes through correct sequence as described... [Read more]
Mend performa boiler problem
4

Potterton Performa 24 combi boiler on off cycling problem?

My Potterton Performa 24 combi boiler ignites correctly but only stays on for a minute initially then switches... [Read more]
Mend boiler central heating hot water

No hot water from Netaheat Profile 50?
Mend coming bleed help

leaks in my netaheat 80e?
Mend boiler heating netaheat

My boiler a Netaheat 10-16 "pulses" ?
Mend boiler heating thermostat

How can i fix my Netaheat pro 40?
Mend boiler electric control

Netaheat boiler 40E electric control?
Mend heating boiler pilot light

How do I fix my boiler?
Mend boiler sludge heating

how do i remove sluge from boiler?
Mend heating hot water no heat

netaheat 10-16 combi not firing up?
Mend boiler heating burner

Boiler fires once then stops?
Mend boiler heating replacement

New replacement Netaheat profile pcb not working?
Mend boiler home heating repair

Netaheat 16/22 dripping water ! Ok to use or repair / replace ?
Mend heating pcb fault finding

Netaheat electronic 16/22 not sparking have changed pcb?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...

Related Categories

Mend Convector Heaters
Convector Heaters
Mend Fan Heaters
Fan Heaters
Mend Oil Filled Radiators
Oil Filled Radiators

Topic

Netaheat 16/22 - No Spark? Troubleshooting