Why do you want to replace the switch?
Before you start just cut the plug and six inches of cable from the end of the power cord - fit a new plug and check to see if the on/off switch has started working again.
My guess is that you have not tested the on/off switch but that you believe it to be defective because it appears not to work. A very common fault with cleaners is a broken conductor - inside the cable near the plug - completely hidden from view. Caused by over enthusiastic tugging by the operator.
I have fixed several (perhaps 6) cleaners this way - I have never had to change an on/off switch.
Of course - you may always have a defective switch.
Good luck...
Peccavi
May 2013
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vacuum cleaners.