Hoover Optima OPH 714P 7kg 1400?

Unplug machine. Now unplug motor. Then try machine again with motor unplugged. If it starts up ok now, then it's a motor fault. If it is still the same, send your electronic module to us for test (£6 inc return post). Tony EMW Electronics, Millfield, Oxton, Notts, NG25 0TD Tel 0115 9652118

www.emwelec.co.uk
July 2012

Lots of things, Mains filter, could be shorting, as the m/c takes more power, water valve/s, as they are one of the 1st to operate, after the programmer, You would need to disconnect things to find out. Mains filter, you would need to bypass it, so if not sure get someone in, water valves, you could pull a wire off, keeping it well away from anything else, then plug m/c back in and try, if does not blow, water valve, replace

SD
July 2012