How do I Replace cooker light in diplomat 1100dfa range?

Thanks mi
Just seen your comment after I posted my result. You are right though - if you dont get the screwdriver between the cover and case it all starts to come away. Gentle flick of the screwdriver just under the edge of the cover and whhhoooohoooo! Chicken now in the oven lit up like A star! Ha

Missy
October 2011

Ok now problem solved! Thanks to a few other tips on here and net.....for anyone else with the same problem.....
Oven bulb replacement- use flat end screwdriver between case and cover - it just pops off!!!
Hood lights - never had a prob but for those with better electrics than mine which require regular bulbs - they screw off!

May need to spray little wd40 to loosed any build up of ming bunt on previously ( and my cooker is cleaned regularly too!).

Nb - cooker smells like a garage even after 20 post washes with cleaning products but does fade with another few good washes! It looks like a new bright pin now!

Missy
October 2011

i was looking for a photo of that bulb cover on line but its hard to see one, the cover might not come off , but the hole thing might just pop out frame and cover in one,, and then you take the bulb out from the back, try get a screwdriver , and prise out the bulb frame a bit at a time, thats how mine works , but its not the same model as yours , you can go to Utube, and type in diplomat oven " and you wil see videos on the there , and ask there, he will tell you there ,,

mi
October 2011