replace fan element ADP4810?

depends how the element is secured,if its screwed to the back plate frome the inside,then its easy job,lust removed trays,turn power off at switch,remove screws and lift element out slowly,be careful of the wires,they are very short,remove the wires then withdraw element,if its held with nuts and bolts,then you will need to remove the oven from base unit,its held in with 4 screws,withdraw the oven,then remove the back panel,get some one to unscrew the bolts from inside while you hold the nut with pliers,fit new element tighten the bolts,fit back panel,put oven back into base,fit cover plate off the element on the inside of oven,switch power on turn oven on you will get a smell of burning and a little smoke as the new element beds in,this is normal

mm
August 2011