Recent: Home max fs506x?

Mend > Home Alarm Systems

Mend Paragon Plus Alarm Set Exit

how can I fix my paragon plus alarm system?

when alarm is set the exit tone still continues when normally it goes off after a certain length of time?

mrs c green
February 2011
Sounds like a faulty contact on the exit door.
Time for a new one.

Alarm
February 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Alarm Set Exit

Related Questions ...

Mend alarm doors instructions
1

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]
Mend security system fault
2

ef fault?

I cannot set the alarm as when I type in my code and A to exit it flashes on 1 and when it does its cycle it g... [Read more]
Mend works set switch
1

The door chime works, but will not set off the alarm when the door is opene?

I have changed the door reed switch on the entry exit door,when the door is opened it sets off the chimes but ... [Read more]
Mend scantronic alarm system fault
2

Scantronic 9800 - c1 alternating t1 (Temper Fault)?

I am a homeowner. I need help to reset c1 T1 fault on my alarm system. I have a SCANTRONIC 9800 ALARM SYSTE... [Read more]
Mend home security security system alarm
16

Entry problem with logic 4 alarm?

Hi I have a logic 4 alarm. When I set it everything is fine. The buzzer buzzes and the exit lights go off when... [Read more]
Mend security system programming
2

No entry time?

I have replaced my old accenta for a scantronic but the alarm activates as soon as my entry exit door is opene... [Read more]
Mend door alarm code
4

exit/enter code to delay alarm when entering?

Paragon Plus alarm Alarm is activated as soon as the door is opened, How do I set the delay
Mend alarm exit allows time entry
1

entrytime?

setting the alarm for exit allows a time delay but on entry the alarm activates immediately, how can i set the... [Read more]
Mend alarm longer set
2

How can I fix my Melcom ST6500 alarm system?

I can no longer set my Melcom ST6500 alarm. I put in the code and the exit beep begins but when I close the fr... [Read more]
Mend scantronic 9800 exit
4

scantronic 9800 entry/exit programming?

hi. i have a scantronic 9800 ,its been re programmed and have the following problem. entry and exit times are... [Read more]
Mend veritas r8 plus alarm
1

How can I fix my Veritas R8 plus alarm?

How do I change zone 1 (hall) to exit/entry on part. At present omitted. Zone 1 (hall) exit/entry on full s... [Read more]
Mend alarm set exit
4

scantroni 9500?

The alarm is triggered everytime it is set with exit fault displayed on pannel,All system test works- change ... [Read more]
Mend security system keypad
11

Scantronic 9800 problem - how can I get it to work?

A Scantronic 9800 was fitted to my house many years ago and the very elderly previous owner lost the codes and... [Read more]
Mend alarm security systems
16

my alarm does not set on exit?

does not set
Mend alarm help intruder
10

My home alarm system is behaving strange can anyone help?

I have a Scantronic 9450 Home intruder alarm system which does not set off the external and internal sounders ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems