Recent: Fix food processor motor?

Mend Convector Heaters

Mend Heating, Convector Heaters
Find out how to mend it for free.

Ask Question
Mend Heating, Convector Heaters
Find out how to mend convector heaters

Mend > Convector Heaters

Mend Pressure Heating Drops

pressure dropping rapidly after use?

even though there are no leaks in the plumbing and we have had a new part fitted which apparently was the course of the problem when the heating goes off the pressure drops really quickly. I put the pressure back in it stays there until the heating comes on again and then drops after,any help would be appreciated.

Bob
January 2011
It may be the expansion vessel that has lost its pressure, you need to check pressure (typically 1.5 bar )when there is no water pressure in heating system.You can check pressure with a car pressure gauge.If you cany see an expansion vessel close to filling loop its probably built into boiler

steve.e
January 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Pressure Heating Drops

Mend Heating, Convector Heaters
Find out how to mend convector heaters

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Convector Heaters
Find out how to mend convector heaters