I recently installed two IC's (STK392-120) in my Phillips rear pro TV to correct a color shadow problem.After installing i now had no picture and bits of sound.I removed and examined my work on the board,I had not soldered all the pins solid,there was movement.I resoldered and reassembled,now i am at square one I have the same picture and sound as i started with,red and blue shadows.Phillips model #55PW9363/17F
You replaced two chips and after a small repair to a badly soldered joint you arrived at the same fault condition as before.
Either the two chips you replaced were not causing the problem - or - one or another of the new chips has exactly the same fault as the original - possible but unlikely.
I suspect that you have not destroyed the ics.
Peccavi
November 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix televisions.