clutch?

cant see it being slave cyl,there is only a piston in it only fault with it is leaks|it,s more likely to be master cyl this has a valve in it which is possibly not closing,therefore not holding pressure.

k
November 2010

does the pedal have any resistance?if not you will probably have air in the system and you could try bleeding the clutch,top up m/cyl.get someone to press pedal 4 or 5 times and hold down to floor then open up bleed nipple slowly and see if you get any air out,catch the fluid in a duster,if not successful it may need a pressure bleeder

cdc
November 2010