yes ,but make sure you remove all power before you work on the oven,the element is held on with two screws,or sometimes with two nuts,if two screws your in luck,remove them and the three that hold the element to the casing,and slowly pull the element towards you,if your really lucky,the wires will be long enough for you to disconnect them,take note off where they go,dont forget the earth,get yourself a new element,and refit .if its held on by nuts,you will have to remove the rear panel,be careful its very sharp,the oven is held into the space by four screws,two on each side,once you remove these you will be able to remove the oven from base,just pull it towards you,
gts
October 2010