Recent: Safely remove screen protector from a Macbook Air?

Mend > Cash Registers

Mend Samsung SPS1000 Normal Error Code

Fault on Samsung SPS1000?

I can't get the till to go to the normal REG mode; just beeps at everything. Seems to have some sort of error code relating to PLU.

Kay
August 2010
Hi the system was off for over 2 years and now the till wont allow any key strokes and has random characters on the screen with wrong date and time.
What can be done to resolve this?

Ali
September 2012
All you need to do thinking about this is with key at register press the x/time key (as well as showing power fail total & number of initial clears done does it show date & time ?) if it does just x/time will clear this hope this helps.

Dave (Wigan)
August 2010
with key at (P) Program. Turn off at plug . Hold down cash key & plug back in keep holding cash key about 5 secs then release then turn key back to register this should unlock any error etc you are stuck in .MAKE SURE KEY IS AT P posistion when you try this hope this helps.

Dave (Wigan)
August 2010
The error code seems to be:
INIT# : 4 PFAIL# : 309

Kay
August 2010
Hi Kay. Are you able to tell me what that error code/ description is?

-----------------------------------------

If any of you are looking for a Samsung / Sam4s SPS-1000 manual,

Operating (user) manual:

http://the-checkout-tech.com/manuals/cashregisters/Samsung_SPS-1000_operating_manual.html

Programming manual:

http://the-checkout-tech.com/manuals/cashregisters/Samsung_SPS-1000_programming_manual.html

Service manual:

http://the-checkout-tech.com/manuals/cashregisters/Samsung_SPS-1000_and_SPS1000V_service_manual.html

Registerman
August 2010

Related Questions ...

Mend carl treadmill showing
1

What does this Error code mean? E03?

I have a Carl Lewis Treadmill showing an error code E03. It turns on, but when I press the start button, it c... [Read more]
Mend washing machine error code appliance
2

How can i fix my F&P Intuitive washing machine?

The pump in my washing machine continually pumps the water out through all cycles even when i push the off but... [Read more]
Mend code buy machine
1

LG TROMM "LE" error code should I buy a new machine, ozone smell?

The other day I got the dreaded LE error code. The washer was not loaded more than usual. It is about 8 years ... [Read more]
Mend error code working
1

Electrolux error code E10?

My Electrolux washer dryer EWX14450W is not working on the drying cycle. It starts up as normal on the drying ... [Read more]
Mend boiler heating error code
1

ferroli optimax HE31C the digital display is saying 'no CN''? ?

We have no hot water or central heating, no other error code is displayed. I've turned off at the mains, press... [Read more]
Mend error code motor drum
1

My hotpoint washer/dryer WD865 gives error code F02?

The motor and the drum rotate freely, put on rinse and spin, starts of as normal but quite quickly errors with... [Read more]
Mend washing machine drain fault
1

jlwm 1203 stops 2 minutes into programme?

jlwm 1203 stops 2 minutes into any programme. The machine appears to fill with water as normal. There is no ... [Read more]
Mend cleaned error cleaning
2

Beko Induction Hob when cleaned shows all error codes?

I have a new Beko Induction hob, when cleaning the hob the error code F comes up on all hob areas, I have to l... [Read more]
Mend security system alarm
6

Veritas 8 alarm will not set!?

Hi, Recently put a new alarm panel in. Everything is working fine, there is 5 zones all wired to the PIRs. ... [Read more]
Mend press start button
1

Baumatic BDW45.1 What does E4 Error Code mean?

Baumatic BDW45.1 What does E4 Error Code mean Water in dishwasher press start button then it goes away. Tr... [Read more]
Mend washing machine code
3

Samsung 5e Error - No debris in filter?

Hi, I have a Samsung washing machine (WF-B1456GW) and I'm getting the 5e error code. I have drained the ma... [Read more]
Mend boiler heating error codes
2

Keston c40 will not run?

Hi,i have a Keston C40 about 4 years old.I have no error codes.The boiler starts at normal code 1 then through... [Read more]
Mend flashing eco dishwasher described
2

Hotpoint DWM55 Error - Flashing Lights Eco and Fast?

My dishwasher recently gave me the flashing lights as described in the Title of this thread. I contacted Hotpo... [Read more]
Mend message month ago
1

Unblock diesel Filter 307 2.0hdi?

Hi, i got the message unblock dieseal filter on my 307 about a month ago, sent it in for a full service and a ... [Read more]
Mend dishwasher error code element
2

Baumatic Dishwasher BDW13 error code E3?

E3 error code is water not reaching the right temperature. So I tested the element and got a resistance of 30 ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Cash Registers ...