hi robert,not had much to do with these motors and dont know the layout of the engine whether there is a lift pump or hand primer or low pressure pump in tank incorporated in the fuel system but you didn`t say if you had manually filled the filter with fuel,doing this would certainly help,it sounds as if it needs all the help it can get to get fuel through the system again,have had problems with other motors starting and you have to watch and not run your pump dry for too long,ended up putting a direct feed onto the pump with a funnel and pipe onto inlet pipe on pump and this at least got the motor running and the pump lubricated,as soon as it starts re connect original piping and it should fire up with what fuel is there and help to draw fuel through the system again,good luck
wickham
August 2010