Beko drcs68w condenser dryer doesn't seem to get very hot, thinks the load is dry when it's still wet, thinks that the filter is in constant need of cleaning(3-4x per load, same with the empty water sensor. Have cleaned the sensor inside the load door, but suspect that the PCB is at fault rather than 3 separate sensors? Dryer had been used about 6 times since purchase 12 months ago, but is now required daily. Any pointers/test values much appreciated,
no heat but is fine otherwise. I have cleaned all filters and tried to do the reset option but still no joy. Please help asap school holidays and five children and to add to it its supposed to rain all weekend
Joanne Richardson
August 2012
Thanks, yes condensor is clean, blew it out with an airline, then hosed it out.
chris.
July 2010
is the condensor at the bottom clean (not the filter).remove it and clean using a hose to flush out the fluff
howtomendit.com for free repair help, information and advice.
