Installed new coil, plug,soliniod, flywheel key, magnet seams good on flywheel, one wire from coil to ground on carb. engine spins fast with elec starter. still no spark Help please Thanks jack
if the small wire on coil is going to a ground thats the prob. the small wire is the engine kill switch.check tomake sure the coil is not up side down the small wire should go down.if its not either one of those problems its prob.a safty switch.hope this helps.
bubbafw
June 2010
Are you sure your not grounding the earth cut out wire, there should be a wire from the coil coming down the side of the engine and into the wireing loom ( assuming this machine does not have contact breaker ignition )
Husqvarna man
June 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lawn mowers.