I opened the door of my dishwasher and there was a loud bang. The door now falls open rather than opening gently. It is as if a spring has gone inside.
i have a hygena ahy8101/2 diswasher water comes into the machine ok but it is not wash dishes on the higher level. can you help
AJ
March 2014
Hygena AHY8101/2 not working at all checked fuse ok just don't know please help thank you
Steve
March 2013
the springs have detached on both sides on my AHY8101 with the springs, a jubilee clip assembly and an L shape bracket all falling out both sides, does anyone have a schematic to show how the re-install?
peter Hill
January 2013
Easy, take off the side covers and repair the plastic retainers that have broken and released the springs. Took me 10 mins.
Gary
April 2009
the machine fails to complete the wash cycle also will not heat continous wash unable to drain
colin
November 2008
Hi Peter
The AHY8101 has a cable on either side (made of nylon type string) and the end pieces consist of a 'T' on one end and a loop through which the spring attaches on the other end. What usually happens is the loop breaks and the spring comes adrift. in order to repair it you will need to remove the dishwasher from the housing and remove both side panels. (the door cables come in packs of two so change both) one side the spring will fall out so check the other to see how they fit. If you loosen the worm drive screws at the top you can release the springs safely. When you have re-fitted the springs etc tighten the screws evenly to avoid too much tension on one side.
Steve
June 2006
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
