Indesit G74C Condensing dryer keeps blowing thermal cut outs?

Check to see if you can see through the condenser filter and make sure the fluth filter is clean. take the back cover off and put your hand at the back of the drum. the hole is above or under the heater element. see if there is any fluth or hair stuck around the drum. remove it. if the problem still persists you will neeed to replace heater element.

Ben
June 2006

I'm having the exact same problem. Not sure if its because its used too much. Trying to decide if I should just get a new dryer.

L McConkey
May 2006