Toyota jet black new machine- needle will not pick up bobbin thread at the threading stage. Was working ok for 1st project. I have dis-assembled, cleaned and reassembled bobbin mechanism and changed needle but still not working
Any chance you could pass email on? having same problem... I know this was a long time ago
Elaine
January 2013
Hello Lorraine,
Providing you have a good needle in the machine and the correct way round, if it is not picking up the thread you may need to retime it, I can attach timing instructions if you type my email address as you say it not as you see it but I need to know whether the bobbin case drops flat on the top or if it goes into a separate bobbin case.
Ken
drivewithken at blueyonder dot co dot uk
March 2010