INDESIT WASHING MACHINE IS NOISEY WHEN SPINNING?

This will help you find out if you bearings are worn

CUT AND PASTE THE LINK IN TO THE ADDRESS BAR

http://www.youtube.com/watch?v=kG5HWQ0x2s0

These videos are for information purposes only. A qualified and proficient engineer should be employed to replace any faulty parts on your domestic appliance.
Visit our shops for all your parts

http://www.Apart4u.com

Or you can visit our eBay shop for bargains

http://stores.ebay.co.uk/Apart4u-Domestic-Appliance-Spares

apart4u
May 2007

The belt is probably worn as well as check the drum pulley for cracks. I found two cracks in the arm of the drum pulley and it was making a ton of noise - especially on the high spin cycles. We replaced the drum pulley and the noise disappeared. Also remove the top cover (two screws in the back hold it down). Check the springs and concrete counter weights. If cracked concrete this will cause some noise as well as vibration. the springs might be loose or have cracked where they are 'seated'

Mike
January 2005

Haynes famous for car manuals also do a manual on how to tackle problems such as this one and a whole lot more. It has helped me a lot - The Washing Machine Manual -

Diy Dave
November 2004

bearings

chris
November 2004