belling IDW 604 power switch is stuck on off?

Made some progress last. I removed the front cover and disassembled the power on/off circuit board. (Note plug out the power or you could get a nasty shock). Anyways the ON/OFF pcb and corrosion on it. I cleaned the board with some alcohol. It worked for a small while, I removed the pcb again and found two tracks had been completely eroded. I repaired the track with some solder and wire. Covered the repairs with silicon to prevent re-occurence. Will be installing the PCB again later. Will update later. Do not attempt this unless you have plugged out the machine from the 240 vac

Big Drill
February 2010

mine is the same . Any joy in resolving this problem

Big Drill
February 2010