undo 2 torx 30 bolts under bonnet on top of bumper. remove 4 plastic clips also on top of bumper. remove either torx 20 or 10mm bolts from corners of bumper and wing from wheelarch. peel back liner to see them. undo 3 clips each side from wheelarch liner underneath attached to bumper. undo two torx 20 bolts from centre of bumper underneath centre of bumper attached to undertray.disconnect foglamp wiring if fitted. pull bumper corners that are clipped into wing and unhook over lion badge and remove bumper. think grille is melted into place.
me
January 2010