more or less like this,some screws will not be in yours as this was for a different but similar model
take the lid off.2 screws at back.push the lid backwards to release.under there is 4 8mm screws that hold the rear half of the cabinet on.there will be 2 or 3 8mm screws across bottom back edge of cabinet and finally 2 8mm screws in the sides towards the middle bottom area with a plastic cap over (prise plastic cover off.one 8mm screw in each hole).release the water valve .now slide whole back half away from the machine frame
ck
January 2010
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.