Thank you Adam. the earth wire was replaced and now the lights now work.Thank you
Jason
December 2009
no i think i would find another mechanic the only interference between the two circuits will the earths ,try running an extra earth to each indicator and see what happens.
adam bike doctor
December 2009
Thank you for the reply abaout the sukida indicators, i went to DC motor cycles and they could not find the fault? and said they have to strip the bike down as it is something to dow the gears as the indicators work when in N but when changing gears only the front right does not work and the dash board is going mad. would you let them strip the bike down as they are the ones that fited the lights in the first place.
Jason
December 2009
They should have two wires to each indicator as far a si can remember the y use honda colours so the wires will be blue to one side and orange to the other both earths are green and the same.if you cant tell which way round the wires go then simply connect one wire from say the left indicator to the orange wire and the other wire to the green wire and turn on the ignition and switch the indicators to the left oif it comes on then bingo if the right one comes on then swap the over.the wires from the actual indicator itself will work either way round as its not an led just a bulb.
adam bike doctor(tired)
December 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.