rads dont work?

you might fine your pump stuck , you need to tap it to help it move around ,

capitalboilers.co.uk
September 2009

hi can close your value half or three qut. of the rad. it may work . or you will have flush by using machine by plumber.

jay
September 2009

Radiators have little bleed screws at the top to let the air out - you very probably haven't bled them - it's quite important to let the air out so the water can get in else they'll not get hot... You'll need a radiator key to undo the bleed screw a couple of turns - don't take it out completely.

Good luck...

Peccavi
September 2009