Mend > Wrist Watches

Mend Crane & Viceroy Battery Radio Controlled

How can I remove the battery spring on my Crane & Viceroy watch?

The watch is a Crane & Viceroy radio controlled type with four buttons in total (two on each side). I can't see how to lift the spring which holds the battery in place as the clip goes down the side between the case and the inards. Is it necessary to lift the inside in order to unhook the clip?

Tom
September 2009

Crane & Viceroy Clocks and Watches, Wrist Watches Battery Radio Controlled Viceroy

It is not necessary to remove the inside from the case.
Use a very small screwdriver to lever the clip outwards that goes between the case and the watch mechanism. It is very difficult to see the latch because of the narrow gap.
It was then easy to reset the time by following the instructions i.e. set fingers to 12 o'clock position etc. It took some time to display the correct time.

Tom
October 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Battery Radio Controlled Viceroy

Mend > Wrist Watches

How can I remove the battery spring on my Crane & Viceroy watch?

Automatic Answer

How can I remove the battery spring on my Crane & Viceroy watch?

I can answer this question ...

How can I remove the battery spring on my Crane & Viceroy watch?

Related Questions ...

Replacement battery cover?

what battery do i need ?

I have radio controlled ladies analogue watch and it stopped?

Crane & Viceroy watch battery?

I have a Crane & Viceroy wrist watchi need to calibrate?

How Do I reset my Crane & viceroy watch after fitting a new battery?

How to mend ...

Related Categories

Topic