hoover HNL6166 door seal?

You will need a 7mm nutspinner and a 7mm spanner to do this. Unplug machine, remove the white plastic clip on front of door seal, you will need to take top off machine. Inside at the back off the seal is a large metal band with a long bolt with nut, this has to be undone to release the old door seal. loosen bolt till nut is almost to the end, don't let nut fall off. Once undone just pull off door seal. Refitting new one is reverse of taking off. Can be a bit of a fidly job getting new seal on though

0101
September 2009