I have a Proline tdc6a tumble dryer that won`t get hot. I`ve changed the rear thermostat and noticed what looks like a heating element underneath that appears to be broken is this the problem?
Hi. If there is a break in the element, then this is almost certainly your problem. To make sure, unplug from mains and use a multimeter to check resistance of heater. It should be about 20 to 50 ohms. If it is open circuit (infinite resistance) then replace element. Good luck. Ian
Ian Young
February 2006
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
