Worcester Oil Heatslave 20/25 noise?

Thanks.
It was both the fan (out of alignment) and the motor.
The bearings need replaced in the motor, I am trying to source a new motor at the moment but I have managed to get the system up and running by lubing the old bearings and fixing the fan.
Cheers!

Bernie
August 2009

Have you checked the system water pressure? could be low water pressure in heating system, Pressure Gauge should read 1-00Bar - 1.5Bar, if not fill using the filling loop, under the top panel on the boiler

If this isnt the problem it is probably the oil Burner motor

www.elanar.co.uk
August 2009

it may be the fan or the pump as they are the only 2 moving parts, but it's a job for a qualified engineer.

Ian
August 2009