Problem with Ideal ISAR HE24 ?

ideal isar 24HE
GCN 47-348-31
boiler inop/dead
replaced PCB
only CH working
did you refit the jumper links in the correct position on the PCB?
chances are you have fitted them the wrong way around & turned your combi boiler into a system boiler
there should have been a guide to jumper positions that came with the new PCB
double check jumper positions first

manwithnoname
June 2012

Sounds like a turbine sensor fault, Have you removed the sensor? if so check it is fitted the correct way round as the only work one way. Otherwise replace the trubine sensor.

Bill
June 2012