I have an Asko Dryer that randomly would overheat and I would have to push the reset button. I checked blower wheel and exhaust, everything was fine - no lint. I would clean out lint filter after every load and even clean screen with magic erase pad and all looked good. FINALLY, I went to the repairclinic.com website and ordered a new filter and filter holder and it is perfect!! I reused the gray seal that goes around the outside of the filter with the clips because I did not realize it did not come with it and would have cost an additional $43 plus shipping. Have done several drying cycles and no problems. One thing I noticed about my old filter was even though all looked good, if I set it on the counter and held it by the center, it would easily pop off, whereas the new one does not. I assume the problem with the fit affected the airflow and caused the overheating problem. Worth a try for $100 and no service call. If you are having this same problem, it is worth a try.
Never Give Up
September 2013