My Hotpoint 7821 runs full cycle but won't drain?

mine had the same problem and by turning the drainage motor a few time it worked.
I took mine out all together and gave it awipe/clean and it seems to be working fine.

minder
September 2006

Thank you, Hotpoint Man for your detailed reply ... I will investigate !

Norman.

Norman
February 2006

Sounds like a blockage in the drain hose, or the drain pump has seized up. Sometimes, if you free the pump rotor off manually by turning it round a few times, it will startup when power is resumed. This can be attributed to rice or congealed fat in the pump. Sometimes, the pumps bearings leak, and the drain pump seizes up completely. Another common cause is under-sink drain assemblies where the DW hose is fed straight in to the drain. These are prone to fatty deposit build up (as the hot greasy drain fluid meets fresh cold water)

Hotpoint Man
February 2006