I am desperate for a timing belt diagram for my VW LT-35 (2003). The water pump has gone cactus and I have taken the motor apart. I cannot seem to successfully reassemble it and would appreciate any assistance. I am also concerned that the timing belt has skipped a tooth. I need to be sure.
nahhh top dead centre for no. piston but the valves need to be in rocking state.... you will see a notch on the injector pump that should line up with a hole in the timing belt cover. just did one and it works fine... the way the 5cyl is it is a bit different to time. cheer
luke
April 2011
i also wud like info on this as my cambelt snaped and need 2 find the timing marks?? oh its a 03 plate 2.5 tdi its already cost me a fortune thats y im doing the job my self thanks..
pete
April 2010
it needs to be a bit more accurate than the description above, google the diagram its on the web
me
March 2010
get no'1 piston at top of stroke , get cam on fireing position for no'1 piston. easy to check if cam's on fireing position,no'1 cam lob will have past inlet valve and exhaust valve cam lob will be ready to exhaust after fireing. twin cams the same thing
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.