Phil's advise was great...stripped the offending locks...care with ball bearings - (mine had 3 in total)..re oil...nipped ends...re-assembled..perfect..many thanks! ps 2 other locks freed up with wd40 so try oil 1st.
DaveB
June 2011
I resolved this problem on my dispatch lock yesterday, all 5 just span round, stripped drivers door down and removed lock from handle, took plastic back piece off the back of the lock and slid out the rest. 2 ball bearings can fall out so do it on a flat surface. when the lock is all stripped, insert the key and the pointed end of the key shows thru the lock. That the problem, when the key is fully inserted, it should push the lock inside forwards but the end at the back of the lock has flared out and doesnt grap the key. I gently squeezed the gap smaller and then when i put the key in, the lock shunted forward. I WD40`d the locks to clear all the filth and re-greased, put all the locks back together and i have 5 working locks.
Phil.
March 2011
I have the same problem with my van you need to change all the locks
Anthony
February 2011
try wd40 into locks first. if it still spins you need to replace locks.
roger
June 2009
they spin round on my 2006 dispatch but only on the side doors
bezza
June 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.