My MAC chain saw will start but is a bit smokey have checked mix ok. Engine dies when reved.Have renewed spark plug Also what are the L and H knarled protrusions on the carb below the idle screw for?
check gas flo from tank to carberator some times the hoses crack and suck air
robert d!!!!
June 2009
The answer does indeed lie with the L and H protrusions...these are Low and High mixture screws, and are used to tune the engine. To get you going, turn both screws fully in (not tightly) then turn them back out one turn.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix hedge trimmers.