any ideas on why my hot water pressure is low i have replaced the stop tap on the cold water tank, which had slight limescale do you think i may have a blockage in the emersion tank?
you may have a blockage if the low pressure problem is a recent development, but if you have never had good pressure it may be that the header tank is not high enough above the cylinder to create a good pressure.
p.s. main place i would guess at for a blockage would be the pipe which goes in to the bottom of the cylinder from the tank, if the tank has lots of limescale in it it could get blocked up at the bottom.
James
April 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix plumbing.