Recent: Safely remove screen protector from a Macbook Air?

Mend > Satellite Navigation

Mend TomTom Go300 Start Hit Reset

Screen frozed?

Go300: I down loaded their new update and now the start screen froze. Will not shut down unless you hit reset. TomTom help had me check disk for errors reinstalled the application 4 times, did a bunch of other checks no luck. The last thing they offered was to reformat the disc. But if this did not work the unit is trash. Did not do this yet. Any help?

Hinzer
February 2009
Get another SD card.
format it.... (fat 32)
put it blanc inside your TT 300.
Connect it to the computer and use the TT-Home program to get the latest software for your device.
Now you can test if you can turn it on and off like it should.
Remember at this point there are no maps installed.

If this fails you know its trash.
If it works (with err. no maps found) you know its oke.

then copy the map from the old SD card to your new one. and your done.

this way you keep the original (possible faulty) SD card intact.

Warning: SD card to buy/borrow should NOT exceed 2GB !! since higher capacity (SDHC) wont work in your rather old device.

Arnold
February 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Start Hit Reset

Related Questions ...

Mend start renault again
2

URGENT how can i start my renault again ???????!!!!!!!!!!!?

car just stopped now cant start it...so what happened was ;serpentine belt snapped, battery drained flat by no... [Read more]
Mend dishwasher kenmore motor
1

kenmore ultrawash model 665 wont unlock or start?

Lock button is lit and wont turn off. Tried breaker reset after 5 minutes and the air dry repeat several times... [Read more]
Mend washing machine control board motor
1

Beko WMXD760W doesnt do anything that requires the drum to turn!?

Hi there, My Beko washing machine is not working. When I select a program and hit the Start button, it do... [Read more]
Mend code refuses start
2

zanussi fjs 1425w error code e54?

My Zanussi refuses to start. When I select a program and hit Start/Pause it beeps but fails to start, when I h... [Read more]
Mend flashing eco dishwasher described
2

Hotpoint DWM55 Error - Flashing Lights Eco and Fast?

My dishwasher recently gave me the flashing lights as described in the Title of this thread. I contacted Hotpo... [Read more]
Mend reset procedure machine
1

Reset Procedure IW509 NZ Eco (Intuitive) F & P Wasing Machine?

I have a IW509 NZ Eco (Intuitive) Washing Machine - it's a Phase 5 IWECO - "Life Cycles" is the bottom right h... [Read more]
Mend heating burner radiator
5

Riello 40 series burner stops ?

Help! I just changed my filter and nozzle. All ran well for several hours and the burner stopped, having to h... [Read more]
Mend renault scenic fault
6

no power to Renault Grande Scenic - how can I fix intermittent fault?

I have an 05 Grande Scenic and 3 wks ago I went to start it but had no power - display lit up faintly then not... [Read more]
Mend worcester bosch pressure
2

Worcester Bosch 28si?

Boiler suddenly stopped working!! Pressure is good, no hot water or heating! Hit the reset, seems as though t... [Read more]
Mend treadmill Proform shuts off
1

Treadmill shuts off seconds after I hit start?

I have a pro form xp 550e. When I push the start button, the treadmill takes off incredibly fast ( you can't s... [Read more]
Mend How to mend it?
1

84 Celica fuel line emergency shutoff switch?

I have an 84 Toyota Celica, recently some high school kid hit my rear passenger side, where the gas tank is. ... [Read more]
Mend boiler heating radiator
1

how can I start my boiler up?

I have a cast iron boiler it is about 35 yrs old. I hit the reset button and black smoke came out of my exhaus... [Read more]
Mend screen black hard
1

I droped my sony ericsson and now the screen is black, can I fix it?

I droped my phone (sony ericsson z520a )it didnt hit hard but when I picked it up the screen wouldnt light up.... [Read more]
Mend boiler oil reset
5

why wont my warmflow oil boiler fire up?

ran out of oil - got a full tank and hit reset a few times - tries to start but fails ti fire up
Mend error code program
1

ZANUSSI FJS 1425W Error code E51?

My Zanussi refuses to start. When I select a program and hit Start/Pause it beeps but does not start. When I... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Satellite Navigation ...

Related Categories