Mend Technics CD Players

Find out how to mend it for free.

Ask Question

Free repair help for Technics cd players

Mend cd players ...

Mend CD Players

Mend > CD Players

Technics SL-PJ27 CD-Player keeps ejecting?

Hey there,

I have a Technics HiFi-system and everything with it works as it should. The only problem I've got is that the CD-players keeps ejecting after awhile. This is what happens:

1. I switch the power on, on the CD-Player.
2. I then open the tray and put a CD on it, and close the tray.
3. The player seems to be working, but after a few seconds it ejects the tray and that's about it.

I tested the player with a few CDs from my music-collection, all of them are original and bought from the stores and none are burnt or pirated, so it should work.

Any help on this would be much appreciated, thanks in advance!

Have a nice day,
Alex

Alex
February 2009

Technics Audio, CD Players

I finally figured out the problem using a rather risky method. There was dust on the lens, and since you have no access to the lens unless you tear your CD-player apart, the only way is to let your finger work.

What you do is eject the CD-player, and while ejected, you get your finger inside and feel the bottom of the area where there should be a lens. Don't push too hard since you could be pushing your lens by accident and then you'll most likely have to trash your player. You only need to get some dust off the lens, so move you finger over the lens, touching it slightly to remove enough dust.

Now get your finger out of there and try to play a CD, and if you're lucky, it'll work. *Excuse me if my instructions sounded dirty*

Have a nice day,
Alex

Alex
February 2009