peugeot partner van as a coded anti start button pad on it, when i look in the drivers window the red light is flashing. when i put key in ingnition and trun key so red
red lights are on the dash,the red and green lights are
both on the button pad,not just the red light, put code
in which should turn green light on, but its just both
lights on. what is the problem and can i get round this and start my van without having to spend lots of money, as its on a p reg and is diesel hope someone can help
I have Peugeot Partner 2002 Van and the Key Fob buttons have perished I cannot use alarm or de-activate it. Replacement quote 14 days and £140. Any ideas please?
Kathy
September 2009
i have a y reg van and it keeps cutting out there is no key pad but if you lock the van and unlock it it will start again for a few mins then cut out how can i bypass this problem.
scott young
July 2009
When the red and the green lights flash on your key pad, it means there's a communication fault between the key pad and the pump module. (which it unlocks when the right code is entered on the key pad.) There are two wires from the key pad to the module, and if one of these wires are cut or broken, it will cause this fault. You can try disconnecting the key pad and reconnecting (maybe a bad connection) or check the resistance of the wires from the key pad to the pump module, but this may be difficult without a wiring diagram. The only other way is to have the injection pump removed and get someone to remove the pump module. Good luck!!
Ian
February 2009
Take it to an autospark these keypads are,nt to hard to wire around to do away with the immobiliser as far as i remember
Kevin
February 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.