The STOP switch has broken its spindle and so pops out. It looks as though the tiny boss on the inside of the panel which contacts the microswitch has a smaller spindle which is glued into the push button's slightly larger spindle in manufacture. I think Triton only sell the complete facia of the shower at £62 quid! Anyone had experience of this? Any suggestions? I have tried superglueing the boss onto the spindle end but to no avail.
The end cap on the end of the spigot which comes out of the back of the square button snapped off on mine, meaning that the button falls out constantly.
Buttons and Retainers (original part numbers listed are correct) but are no longer available from Triton - discontinued after 5 years.
The parts look like they are available from www.showerdoc.com (0131 538 4343).
Peter
July 2011
phone triton direct on 02476372222, they will now sell
a new button and cap for £18.99 inc p&p.
part nos are 7052058 and 7051695. a lot cheaper than
£62.
dex
February 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.