Recent: Home max fs506x?

Mend > Washing Machines

Mend Fault Checked Connectors

E91 fault?

Thanks for the reply "Dannyboy". Checked connectors and this appeared to work - or at least seemed to allow machine to start - but E91 code has appeared again. Will take connectors completely off and try to clean as you suggest. Many thanks. LB

LB
December 2008
Household Appliances, Washing MachinesFault Checked Connectors
take lid off.find blue loom with 5 wires that goes to the front display /buttons user interface and where it attaches to the pcb they get a bad connection and cause E90/E91 error codes.wire needs removing from pcb and connections tightening (bend them slightly with a needle) and the pcb tracks need cleaning.reconnect and hopefully all will be well.

ck
December 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Fault Checked Connectors

Related Questions ...

Mend indicators working fault
2

No LCD Indicators working on Control Console ?

I have no indicators working at all on the control console so could you please tell me what this fault may be.... [Read more]
Mend citroen xsara alternator
1

batterycharge fault citroen xsara picasso?

i have a y reg picasso, i went out to it two days ago and battery was dead wouldnt start. So looked for a reas... [Read more]
Mend starting switch start
1

Zanussi ZWF1421W - not starting?

From switch on, and after selecting the program, and pressing start nothing happens. After about 10 seconds th... [Read more]
Mend Peugeot Scooter 50cc
1

2006 Peugeot jetforce 50cc scooter electric starter fault?

Hi, my fiancee's electric starter button doesn't work, checked starter by puttin a split pin in relay connecti... [Read more]
Mend Peugeot Jetforce 50cc
1

2006 peugeot jetforce 50cc electric starter fault?

Hi, my fiancee's electric starter button doesn't work, checked starter by puttin a split pin in relay connecti... [Read more]
Mend boiler hot heating switch
1

Ravenheat LS100T combi boiler?

The boiler is not working on either the hot water or the central heating. When I go to switch it on the green ... [Read more]
Mend dipped beam beam
1

My Fiesta MK4's dipped beam lights dont work. Why? Side & high beam do?

Bizarre. I have checked fuses- both fine. Visual inspection of wiring- fine. Changed the light & indicator con... [Read more]
Mend tumble pump fault
2

Leaking White Knight 767C tumble dryer fixed!?

Not a question but notes on how I fixed (I hope) our WK 767C. The fault was that the sump pump had failed -... [Read more]
Mend power cable time
1

How do I get to the power cable on my Dyson DC04?

I have had an intermittent electrical fault on my Dyson DC 4 for some time and now it has packed-up completely... [Read more]
Mend washing machine Hotpoint fault

Door sensor Hotpoint WMXTF 742?
Mend washing machine LG Intellowasher

Washing programme stops after 3 minutes?
Mend washing machine miele valve

Miele W800 novotronic washing machine?
Mend siemens washing error

Problem with siemens washing WM14S7B1EU?
Mend washing machine Hotpoint aquarius

Not starting until I bang door closed?
Mend Household Appliances, Washing Machines

Washer hw50 - 1010w?
Mend Household Appliances, Washing Machines

Bosch maxx 6?
Mend Household Appliances, Washing Machines

Coupling remove?
Mend washing machine hotpoint spin

Hotpoint wt960?
Mend washing machine bosch drain

Bosch Classix Type WKM41 front loader washing machine?
Mend Household Appliances, Washing Machines

I cannot cancel the delay function on indesit wxl 05?
Mend washer dryer error code hotpoint

Washer dryer WD640 flashing H20 error?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...

Related Categories

Mend Knitting Machines
Knitting Machines
Mend Sewing Machines
Sewing Machines
Mend Stairlifts
Stairlifts
Mend Steam Cleaners
Steam Cleaners
Mend Steam Irons
Steam Irons
Mend Tumble Dryers
Tumble Dryers
Mend Vacuum Cleaners
Vacuum Cleaners

Topic

E91 Fault - Washing Machine Help