Recent: Fix food processor motor?

Mend Peugeot Motorcycles

Mend Vehicles, Motorcycles
Find out how to mend it for free.

Ask Question
Mend Vehicles, Motorcycles
Free repair help for Peugeot motorcycles

Mend > Motorcycles

Mend Peugeot Bypass Speedfight Immobiliser

how can i bypass my peugeot speedfight immobiliser?

how can i bypass my peugeot speedfight immobiliser

david sutherland
November 2005
Can the immobiser on my speedfighter stop it from sparking, my bike sounds like it wants to start, but just no spark. I've changed the spark plug, ht lead and coil pack, tried a new cdi unit, so if you have any idea as i don't please help!!!
Thanks

Ollieee
August 2014
can anyone help me please.....my pegueot jetforce 50cc is trying to turn over and sparking but not starting...the immobiliser red light stays on, a k on dash light is flashing and petrol meter is flashing...i have put a full tank of fuel in it....it seems like the immobilser is not letting the petrol through or something ?

GAZ
June 2014
can any1 get me a diagram in how to bypass my immobiliser on my speed fight 50 53 plate

leon
December 2013
does a pegeot ludix blaster have a imobiliser becase the light seem to come on but it dosent turn over ?

alex
December 2012
I need tom bypass the immobiliser for peogeot vivacity 100. It is too expensive to buy a new one.

mark falzon
February 2012
if you have got a problem with your speedfight immobolishers call 07756583246/07774941114

mr tune
November 2011
how do i get fasteter on my 2005 peugeot trekker it has immobaliser and a catalytic converta i took the washer out the vairiator and cut the exstra pipe of the exhaurst it now does 35 please help despret

lee
November 2011
hello i have a peugeot trekker 50 and i have the imobiliser problems to what can i do to unimobilise it without buying the new imobiliser unit

jason mchugh
July 2011
You can fit a 4 pin 12v dc cdi to your speed fight,all you need to do is cut the pick up wire coming out of the 3 pin plug from the engine the wire is blue/yellow run this to the new cdi box.
There is one feed positive from the ignition switch(this will enable you to kill the engine) one wire to earth or ground and one to the coil,the black side the green side goes to ground earth. And that is it. Simples in it!
Hold the cdi box with the clip at the top now look at the connector,top left(pick up)top right(coil)bottom left(ground/earth bottom right(positive from ignition)
Other folks have said that you need to get rid of the imobi stator because it does not have a pulse gen coil,which is true if you run a 5 pin ac cdi but there is no need for the gen coil with the 4 pin dc cdi box as it will be fed from the ignition. Well people hope this has helped all of you in your quest to get rid of the crap the peugeot have made us suffer with all this time! Beleave"it works!

Bright spark
February 2011
Hi again, fried the cdi because it was an ac one. have heard that a 4 pin dc c90 unit can be used, live from ign to energise, green to earth, blk/yell to coil/plug and blu/yell from pulse trigger, will try it and post results.

pete
December 2010
Need help too. Got a vivacity 50 with an aci100 cdi which has gone tits. Tried a pit bike cdi but fried it. Need to know what wire goes where. Had Yell/Blue from pulse coil, Yell/Black to Coil, Green to earth and black live from ignition. Turned over but no spark. Maybe pit bike cdi was tits too. Anyone wired up a honda 90 cdi or made their own?

pete
December 2010
i have a peugeot speed fighter 55 plate when i go to start it by the electric start all the lights work but the bike wont tick over and suggertons what it could be??

jason
November 2010
i want to take my immboliser off my bike does anyone no anything about what wires i need to get red off

michael
July 2010
hi i have got a speedfight 2 wrc how do by pass the immoblilser can any 1 help

Grant
May 2010
try a honda c90 cdi??but a peugeot zenith cdi might work

bike theif
May 2010
key broken off in ignition so brought another with key,how can i get the immobiliser to work with this ignition

gary
April 2010
i have a peugeot speedfight x-race 05 and i am having problems with my moped when trying to start it .when i turn the ignition on the fuel gauge doesnt go up like normal it just stays down even though i have a full tank of petrol also neither does my horn or indicators work becasue of this when pressing in the electirc start nothin happens =[ . i would appreciate it if anyone could helpp thankyou.

Ryan
February 2010
if your immobiliser is stopping your bike from starting you can disconnect the battery for 24 hours which then lets the immobiliser reset itself an the bike should start.

i had the same problem the immobiliser light flashed 3 times then stayed on once i done the above the bike started first go

Eamon k
December 2009
i have the same problem my speedfight 2 2003 wont do anything only thing that does anything is the red led light keeps flashing getting nothing else can ya help

scramman
October 2009
the person call mark a honda cdi dose work as i have done about 10 off them for peopel with problems with the cdi immobilser there a pain

jim the butcher
October 2009
some1 told me they stuck a honda 90 cdi on theirs and it worked????

mark
April 2009
how can i bypass my elyseo 100 cc imobiliser without it costing me much money there has to be a cheaper way than buying a new cdi????

bezza
April 2009
I found this page (that claims to solve the problem): http://www.stenberg.dk/ACE400.htm

Bert
September 2008
how can i bypass the immobiliser on my peugeot trekker

cambo4
July 2008
can any 1 tell me how 2 bypass my peugeot speedfight 05model ? some 1 plz tell me ...thank's

Lee
April 2008
speedfight running poor

jason wint
December 2007
thanks alot will try and get back cheers

phil- scarborough.
October 2007
i am having the same problem and if anyone could explain it a little easier it would be much appreciated i have a speedfight 2 50cc 2001 model i have just bought the ped but the logbook is taking ages to come back to me so cannot get it done by peuguot but really need to use my ped as soon as

jordan
September 2007
anyone know how to bypass cdi on a ajs dd125e

dean
September 2007
anyone no how to bypass the immobilser on a vivacity 50cc,2001 plate??

garry
June 2007
a work at these scooters for a living and got so p*ss*d off with these immobilisers going on dem i decided to give it a go my self and i managed to bypass a 2003 peugeot speedfight 100 cc with the one box immobiliser if anyone wishes to purchase the plans on how to do so u can contact me on 07707590342 i guarentee it to work as i have been doin this ever since scootermans apprentice

big jaspers
March 2007
connect the green battery to a seperate wire, then connect that to the red wire, this will bypass the cdi and immobiliser.

Ped King
September 2006
you cant bypass it but you can fit a wiring loom and cdi unit from an early model which wasnt chipped ok from adam the mechanic

adam
December 2005
Mend Vehicles, Motorcycles
Free repair help for Peugeot motorcycles

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vehicles, Motorcycles
Free repair help for Peugeot motorcycles