how can i fix the steering on my jcb 3cx 2 wheel drive?

remove 24mm alumnium nut & remove spool& spring clean same with fine emery & then petrol re fit & try good luck

kerb side plant!
May 2009

hi if you need any technical assistance with your jcb or new or second hand parts contact the digger doctors uk on 01455612307 they are very helpfull

dave
January 2009

You might also check that your hydraulic oil is at a
suitable level and that oil is reaching the pump.
Check that you don't have kinked or damaged hoses
or fittings before buying new parts. You MIGHT save
some money.
What age is the M/C? Is it an early one with Leyland
4/98 engine or Perkins? If Leyland, there are other
possibilities for problem.

Mr. Toad
December 2008

The 3CX has a separate pump for the hydraulic steering. Is the pressure ok? Is the oil level OK. If the pump is being turned correctly then it's probably a worn pump or the Danfoss steering thingy that mechanically connects to the steering column - they turn up on ebay for circa £100 now and again.

AWEM

Andrew Mawson
December 2008

put the steering wheel back on

john
December 2008