Hi, the fan on my hood has stopped working, the lights are working except the small neon fan indicator. The main sw is supplying power to the motor, I have put my ohm meter across all the motor windings which reads I have a circuit, any ideas please?
Thanks for all your help, Hayabusaman
NO THE PARTS ARE ALL STILL AVAILABLE AT OUR SITE
WWW.APART4U.CO.UK ALL MFI SPARES
APART4U
October 2009
Thanks Foxy, I have double checked the switch & found that it was not connecting on the neutral side of the switch, I am in the process of ordering a new PCB.
Once again thanks for your help, Hayabusaman.
Hayabusaman
December 2008
Hi Hayabusman, it is more than likely not the motor, it is the pcb switch assy.Was the neon flickering recently? You will need a new pcb W0000051.
try the interspares website,they may have one or put you in touch with someone.All the best.
FOXY
November 2008
Thanks airkool, I just want to be certain that it is the motor, can you tell me of any other checks I can make to be sure?
I have seen other sites that can supply parts so I don't think that will be a problem.
Thanks, Hayabusaman
Hayabusaman
November 2008
u will need to replace the fan motor but that could be problem as mfi gone bust and cant get parts
airkool@hotmail.co.uk
November 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.