Zenith H2013Y Aux. input?

I get to the screen but can't get to the option. How do you get thete?

arron
November 2013

This was a challenge, but with a little more determination and patience, everything was worth it. LOL! My 5 year old and her dusty VHS tapes Thank You/and all that helped. Just imagine... ALL of the buttons, on the left side on the t.v. UNMARKED?!? Ironically the Vol Up/Down & Ch Up/Down buttons are CLEARLY marked??? Yes... pure Joy! LOL!!! Excuse me, while I go take some Excederin now...

CLinWA
June 2012

This was truly a life saver! For mine it was slightly different but the key was the 4 digit code!!

ARCinNC
July 2011

what do you mean menu disepears

dude
January 2011

This article did get me going in the right direction although I have a Zenith se2593w. For the se2593w (if anyone other than me in the world owns one).

1. Continuely press the menu button until you reach the "source:antenna" option.

2. Use adjust button to toggle to "source:aux"

voodooG
October 2010

Hold menu down untl it dissapears then punch 9876+enter, new menu shows up and go to bottom of second row and turn aux on . I then turned the TV off and back on and AUX shows up when I go down my channels. Thanks for the info.

Smitty
August 2010

DUDE THANKS YOUR A LIFE SAVER

GOD
July 2009

WOW! thank you! It took me a forever to finally find somone who could help. Would have never figured it out without you!

S.B
March 2009

KB THANK YOU!

it worked for my tv i would of never figured this out............ without you!

GABE
January 2009

this works. as far as moving through the menus, it is the REC button on my remote that facilitated that.

JY
December 2008

It didnt work so yall know, I pressed and held it on the TV and the menu dissappeared but i dont understand what yall meant by 9,8,7,6 enter. If you meant the remote it didnt work, if you meant buttons on the tv, there is none

JB
November 2008

This worked for me however at first i didnt hold the menu button down on the tv. Cant do it fromt he remote. Also once your done changing the aux to on, you scroll all the way back to the top left where it appears to be a version number and hit enter to exit. Alot of people are lazy about putting the complete details on how to do something.

Yo
July 2008

1) Press and hold down the menu button (until the menu disappears).
2) Then input code 9, 8, 7, 6, enter.
3) A new menu should appear. Go to C10 Aux (bottom of 2nd column) and change to "ON".
4) AUX will be added as a channel and will fall right below channel 1.

KB
October 2006