take front of your scooter off and you will see the horn and loosen the nut that holds it on take the horn off and the wires connecting to it then put the back on to the horn and make shore the horn and the melt box are touching then press the horn and if it vibrates in your hand start to screw the ting screw at the back in and out till it starts to work again
sukida dragonfly 50cc n+j
July 2009
if you look above the front wheel and inside the fairing you will see the wiring loom i bet one of the white plugs has come apart it happened to my sons bike too while you are there make sure the wires are fastened back to the frame his wernt and were also damaged by the steering action
mick m
February 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.